Highlights

This Structure Contains

  • 15 Amp, 120 Volts, Single Phase
  • Stamped Engineered Drawings
  • 1000 US Gallons / 832 Imperial Gallons / 3,785 Litres / 3.78 Cubic Meters
  • CSA Variance (Plumbing) & Local AHJ Electrical Inspection
  • Inlet Connection: 4” / 100mm DR11 (at each end) welded to HDPE liner
  • Suck Out Connection: 3” / 75mm DR11 (at each end) welded to HDPE liner equipped with a gate valve
  • Alarm Type: Float controlled alarm (field adjustable) visual & audible alarm
  • Snow Load: Rated at 15lbs. per square foot
  • Lifting Method: Skid mounted w/two hooks & equipped with (4) 1,000lb. welded D-Rings (empty only)
  • R-Value: Approx. R-14
  • Liner Type: Rotational molded HDPE (min. 3/16” thickness)
  • Heat Trace: Raychem Wintergard Wet – 120V 6W/FT Self Regulating w/GFI Cord End
  • Installation Restrictions: Must be level & properly supported (do not bury)
  • Inspection Access: 16” Removable access lid at each end
  • 1,200lbs. each

Illustration

Komplete_1000G-Low-Profile-Sewage-Tank.jpg

Other Water & Sewage Storage Units

Site by Morad Creative